Operating instructions

19
Dynamic weighing with manual start (F dYn M)
➞ Place empty container on the balance and tare. Press
→
0/T
←
.
Switch to dynamic weighing. Press . The display shows ,.
➞ Add weighing sample to container.
➞ Start weighing with .
During the weighing time, a "count down" runs in the display.
➞ Read off result.
The result of the dynamic weighing is indicated by ✱ (= computed value) and remains in the display until
the weighing sample is removed from the weighing pan.
Changing the weighing time
➞ Press and hold
F
until "t = 3" appears in the display.
➞ Press repeatedly until the desired weighing time appears.
Possible values are 3", 5", 10", 20", 1", 2".
➞ Press briefly to confirm selection or by automatic acceptance after 2 seconds.
Notes
• The set weighing time remains stored until it is reset or the power supply fails.
5.4 Switching weight units
Requirement
Different weight units must be activated in the menu for unit 1 and unit 2 (section 4).
This function is not available with dynamic weighing.
Switching between unit 1 and unit 2
➞ Press briefly. Switching between weight units may be blocked with certified balances, depending
on the national weights and measures legislation.
22.00
0.78
oz
kg
F
0.00
T ≠ 3 ”
g
T ≠ 5 ”
-- 3 --
260.33
g
257.35
g
-- 1 --
0.00
g
0.00
g