Operating instructions

17
5.2 Percent weighing
Requirement
The function "F 100 %" must be activated in the menu (see section 4).
Set target weight
➞ Place target weight in center of pan.
➞ Press and hold
F
until "SEt 100 %" appears in the display.
➞ Press briefly to confirm or automatic acceptance after 2 seconds. The target weight is specified.
Notes
• The current target weight remains stored until a new target weight is set or the power supply is interrupted.
Percent weighing / switching
➞ Place weighing sample in center of pan.
The weight of the sample is displayed as a percentage of the target weight.
➞ Press briefly, the weight is displayed.
➞ Return to display in percent: press briefly again.
g
0.00
148.50
F
sET 100
g
%
100.0
%
101.6
%
150.88
g
101.6
%