Operating instructions

4.2.4 Selecting unit 1

Depending on requirements, the balance can operate with the following units:

Unit Conversion factor Comments

g gram factory setting

kg kilogram 1 kg = 1000 g not with 1 mg balances

lb pound 1 lb ≈ 453.59237 g not with 0.1 mg balances

oz ounce 1 oz ≈ 28.349523125 g

ozt troy ounce 1 ozt ≈ 31.1034768 g

GN grain 1 GN ≈ 0.06479891 g not with 1 g balances

dwt pennyweight 1 dwt ≈ 1.555173843 g

ct carat 1 ct = 0.2 g

mg milligram 1 mg = 0.001 g only with 0.1 mg and 1 mg balances

mo momme 1 mo ≈ 3.749999953 g

m Mesghal 1 m ≈ 4.6083162 g

H tl Hong Kong taels 1 H tl ≈ 37.42900 g selectable only in unit 2

S tl Singapore taels 1 S tl ≈ 37.799366256 g selectable only in unit 2

t tl Taiwan taels 1 t tl ≈ 37.499995313 g selectable only in unit 2

4.2.5 Selecting unit 2

If the weighing results should be shown in a different unit in the weighing mode by pressing

(see section␣ 5.4), the appropriate unit must be selected in the menu.

4.2.6 A. oFF – automatic shutdown

The automatic shutdown extends the operating time in line-independent operation with the PP-B10 PowerPack

considerably.

When the automatic shutdown is activated, the balance switches itself off if no weighing has been performed

during the specified time. With the PowerPack the balance is then off, without the PowerPack it is on standby.

A. oFF – no automatic shutdown (factory setting)

A. oFF 2 automatic shutdown after 2 minutes

A. oFF 5 automatic shutdown after 5 minutes

A. oFF 10 automatic shutdown after 10 minutes

Unit1

A. oFF 2'

A. oFF 5'

A. oFF 10'

A. oFF –