Operating instructions

10
3.3 Taring
➞ Place empty container on the balance.
➞ The weight is displayed.
➞ Tare: press
→
0/T
←
briefly.
➞ Add weighing sample to container, the net weight is displayed.
If the container is removed from the balance, the tare weight will be shown as a negative value.
The tare weight remains stored until
→
0/T
←
is again pressed or the balance is switched off.
3.4 METTLER TOLEDO DeltaRange balances
METTLER TOLEDO DeltaRange balances have a movable fine range with 10 times smaller display steps. In
this range there is always an additional decimal place in the display.
The balance operates in the fine range
• after switching on,
• after every taring operation.
If the fine range is exceeded (section 6.1), the balance display automatically switches to greater display steps.
g
=00
g
=00
g
12+01
#
g
9%97
-12+01
g
Note
With METTLER TOLEDO DeltaRange balances, the fine range with its 10 times smaller display increments is
again available after every taring operation.
On
g
651.4
g
0.00
#