Operating instructions

2 Startup

2.1 Unpacking / Standard equipment

All B balances are supplied in an environmentally harmless package. The standard equipment of the B balances

includes

• AC adapter, to national codes,

• Weighing pan,

• operating instructions, to allow optimum utilization of the capabilities of your balance,

• Description of interface commands (“MT-SICS Reference Manual, available in English only)

• calibration weight, with CB balances and College B154 only,

• draft shield, mounted with CB balances and College B154, for mounting by user with College B303,

• carat pan, with CB balances.

Note

Calibration weights can be ordered from METTLER TOLEDO for all other B balances, see section 5.2.

2.2 Cautionary notes

• B balances may not be operated in hazardous areas.

• Before attachment of the AC adapter, check whether the imprinted voltage value matches the local supply

voltage. If it does not, contact your local METTLER TOLEDO dealer.

)With the PS-EX2 power supply unit/AC adapter available as an option, all B balances can be used in

Ex zone 2 (section 5.3).