Operating instructions

4.2.8 Setting baud rate (data transmission rate)

The data transmission rate (baud rate) determines the speed of the transmission via the serial interface. The unit

is baud (1 baud (bd) = 1 bit/second).

The following settings are available: 150 bd, 300 bd, 600 bd, 1200 bd, 2400 bd, 4800 bd and 9600 bd.

4.2.9 Setting parity/bits

In this menu option you can set the character format for the attached peripheral device.

7b–E 7 bits/even parity

7b–no 7 bits/no parity

8b–no 8 bits/no parity

7b–odd 7 bits/odd parity

4.2.10 Setting handshake

This menu option allows you match the data transmission to different serial receivers.

HS oFF No handshake

HS SoFt Software handshake (XON/XOFF)

HS HArd Hardware handshake (DTR/CTS)

Note

If you have selected the setting “HS HArd”, the attached peripheral device must be switched on. If it is switched

off, the balance is blocked.

4800

1200

2400

7b-odd

7b-E

7b-no

8b-no

HS HArd

HS oFF

HS SoFt