Operating instructions

7.3 Connecting B-S balances to other METTLER TOLEDO devices

Device Connecting cable settings/

Remarks

Titrators:

DL67, 70ES, 70 V.2, 77

DL12, 18, 20, 21, 25,

DL35, 40GP, 40RC not supported

DL37 (KF, coulometer) not supported

DL31, 36, 38 RS9–RS9 (m/f) send continous

DL50, 53, 55, 58 11101051

RD10 (rheometer) not supported

Contalab not supported

MTCom-Bus 310 RS9–RSopen (m/-)

21900640

SQC 14 RS9–RS9 (m/f)

(statistical quality control) 11101051

Spider (industrial scale) RS9–RS9(m/m)

Viper BC (industrial scale) 21252588

MMR, ID-Terminals not supported

M peripherals (GM bus) not supported

LC-PVolume (pipette calibration) RS9–RS9 (m/w) recommended

11101051 AT balances

LC-PCalc RS9–RS9 (m/w)

11101051

LC-P Density not supported only with AX-, PR-,

PG-S balances

LC-P45 (application printer) RS9–RS9 (m/w)

11101051

GA42 (report printer) RS9–RS9 (m/w)

1110105

7.4 Maintenance and cleaning

Service

Regular servicing of your balance by a service technician prolongs its working

life. Ask your METTLER TOLEDO dealer for details of servicing options.

Cleaning

The balance housing and weighing pan are made of high-grade durable

materials. All commonly used cleaning agents can therefore be used.

Soiled protective covers can be replaced on all balance types (see Optional

equipment).

Note

After working with chemicals, it is advisable to wash or clean the weighing pan

and the bottom plate (if draft shield fitted).

Although all materials are of high quality, corrosion may occur if corrosive

substances are deposited on chrome steel for an extended period of time (and if

air is excluded, for example by a coating of grease).

Attention

If you have to dispose of the instrument, contact your METTLER TOLEDO dealer.