Operating instructions

32
Die unten aufgeführten MT-SICS Befehle sind eine Auswahl der zur Verfügung stehenden
Befehle. Weitere Befehle und Informationen entnehmen Sie bitte dem Bedienungs-
handbuch “MT-SICS Basic-S balances 11780447”, das Sie unter www.mt.com/AB-S aus
dem Internet herunterladen können.
S – Send stable weight value
Command S Send the current stable net weight value.
SI – Send value immediately
Command SI Send the current net weight value, irrespective of
balance stability.
SIR – Send weight value immediately and repeat
Command SIR Send the net weight values repeatedly,
irrespective of balance stability.
Z – Zero
Command Z Zero the balance.
@ – Reset
Command @ Resets the balance to the condition found after
switching on, but without a zero setting being
performed.
SR – Send weight value on weight change (Send and Repeat)
Command SR Send the current stable weight value and then
send continuously the stable weight value after
every weight change.
The weight change must be at least 12.5 % of the
last stable weight value, minimum = 30d.
ST – Send stable weight after pressing ± (transfer) key
Command ST Inquiry of actual status of the ST function.
SU – Send stable weight value with currently displayed unit
Command SU As the “S” command, but with the currently
displayed unit.