Operating instructions

26
Dynamic weighing with manual start (F dYn M)
➞ The «“» key can be used select the dynamic weighing. The display shows the symbol ,.
➞ Load weighing sample.
➞ Start weighing with the «±» key.
During the weighing time, a “count down” runs in the display.
➞ Read off result.
The result of the dynamic weighing is displayed with ✱ (= calculated value) and remains in the display
until the weighing sample is removed from the weighing pan or the container.
Notes
• The weighing cycle with the same weighing sample can be restarted with the «±» key.
• The «“» key can be used to switch between dynamic weighing and normal weighing.
• For weighing goods below 5 g the weighing must be started manually with the «±» key, even for
dynamic weighing with automatic start.
Changing the weighing time
➞ Press and hold the «F» key, until “t = 3"” appears in the display.
➞ Repeatedly press the «“» key, until the desired weighing time appears.
Possible values are 3", 5", 10", 20", 1", 2".
➞ Selection with the «±» key briefly to confirm or by automatic acceptance after 3 seconds.
Note
The set weighing time remains stored until it is reset or the power supply fails.
M
E
T
T
L
E
R
T
O
L
E
D
O
F
C
a
l
/
M
e
n
u
C
On
o
f
f
O/T
0.00 g
0.00 g
“
<
•
257.35 g
<
-- 3 --
<
-- 1 --
<
‹
260.33 g
<
▼
±
F
“
±
t ≠ 3 ”
<
<
0.00 g
t ≠ 5 ”