Operating instructions

25
5.3 Dynamic weighing
Dynamic weighing is suitable for the weighing of unstable weighing samples. The mean value of the weighing
results is determined over a specified time period (weighing time). The more unstable the weighing sample,
the longer the selected weighing time.
Requirement
“F dYn A” for automatic start or “F dYn M” for manual start must be activated in the menu (Section 4).
Factory setting is a weighing time of 3 seconds (t = 3").
Tare container
➞ Tare: Press the «#» key.
Dynamic weighing with automatic start (F dYn A)
➞ The «“» key can be used select the dynamic weighing. The display shows the symbol ,.
➞ Load weighing sample. As soon as the balance is relatively stable, weighing starts automatically.
During the weighing time, a “count down” runs in the display.
➞ Read off result.
The result of the dynamic weighing is displayed with ✱ (= calculated value) and remains in the display
until the weighing sample is removed from the weighing pan or the container.
M
E
T
T
L
E
R
T
O
L
E
D
O
F
Cal
/M
enu
C
On
off
O/T
0.00 g
0.00 g
“
<
•
257.35 g
<
-- 3 --
<
-- 1 --
<
‹
260.33 g
<
▼