Operating instructions

22
4.3.14 Bit/Parity (14th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 10th menu option
(Peripheral unit)!
At this menu option you can set the character format for the attached peripheral device.
7b–E7 data bits/even parity
7b–no 7 data bits/no parity
8b–no 8 data bits/no parity
7b–odd 7 data bits/odd parity
4.3.15 Handshake (15th menu option)
Note: This menu option is only available if you have selected the setting “Host” in the 10th menu option
(Peripheral unit)!
This menu option allows you to match the data transmission to different serial receivers.
HS oFF No handshake
HS SoFt Software handshake (XON/XOFF)
HS HArd Hardware handshake (DTR/CTS)
7b-E
“
7b-no
8b-no
7b-odd
“
“
HS oFF
“
HS Soft
HS HArd
“