Operating instructions

18
4.3.3 Functions (3rd menu option / Operating Section 5)
In addition to simple weighing, the following functions can be selected:
F count Piece counting
F 100 % Percent weighing
F dYn A Dynamic weighing with automatic start
F dYn M Dynamic weighing with manual start
F nonE No function, simple weighing (factory setting)
4.3.4 Weighing mode (4th menu option)
This setting allows you to adapt the balance to the weighing mode. Select “Std” (standard) for all normal
weighing processes or “doS” (dispensing) for dispensing liquid or powdery weighing samples. In this setting,
the balance responds very quickly to smallest weight changes.
When set to “robuSt” (absolute weighing), the balance responds only to greater weight changes, and the
weighing result is very stable.
When set to “SEnSor”, the balance delivers a raw, unfiltered weighing signal, and is only suitable for special
applications. (Only available on AB135-S/AB265-S models).
F count
“
F 100 %
F dyn Ÿ≈
F nonE
“
“
F dyn A
“
PCS
Std
“
doS
robuSt
“
SEnSor