Instruction manual

Mettler Electronics Corp.— Rev.F_07/03/12
30
Timer 0 to 99 minutes 59 seconds, 1 second increments (decrementing).
Audible signal and output termination at time expiration
8.3 Laser Applicator Specifications:
Lasing device: Sanyo Single AlGaAs Diode (Class 3B laser device)
Wavelength: 785 nm ± 10 nm
Power: 80 mW ± 10 mW
Treatment area
illumination:
Three Blue LED's (470 nm, visible through eyewear protection that
attenuates Infrared/Near Infrared)
Output activation: Capacitance Switch on Laser Applicator handle
NOHD Nominal Ocular Hazard Distance is less than 35 cm.
MPE (skin only) ~ 3.3 MPE, less than maximum allowable of 5 MPE
Beam spot Elliptical beam spot 2.8 mm x 1.1 mm ( elliptical beam area of = 9.2
mm²) at the aperture.
Divergence Elliptical Beam divergence 18 degrees and 7 degrees
Eye protection Uvex glasses with a minimum of 80% attenuation in the wavelength
range of 780 nm to 860 nm. The Uvex glasses supplied with the unit
meet these requirements.
8.4 Optional Cluster Applicator Specifications:
SLD Twelve 950 nm Super luminescent Diodes
LED Seven 660 nm Light Emitting Diodes
Total Power 500 mW ± 50 mW
Treatment area
illumination
The 660 nm LED's are visible and illuminate treatment area
Output activation Capacitance Switch on Cluster Applicator handle
Eye protection Uvex glasses with a minimum of 80% attenuation in the wavelength
range of 780 nm to 1200 nm. The Uvex glasses supplied with the unit
meet these requirements.