Operation Manual

WESROC Residential LTE Cellular Tank Monitor - Operation Manual
72-70-214, Rev. D Page 5 06/25/2018
Safety Information
Hazardous Environments
The WESROC Residential LTE Cellular Tank Monitor (RTM) is designed for safe use in environments
containing hazardous vapors. However, certain precautions need to be taken to ensure the safety of the
person(s) working with the RTM, the tank, and any associated equipment.
TO ENSURE SAFE OPERATION: Install the RTM according to the instructions contained in this WESROC
Residential LTE Cellular Tank Monitor Operation Manual.
WARNING!!!
Do NOT loosen or remove float gauge from a pressurized tank!
Tank decompression can cause serious injury or property damage!
WARNING!!!
Do NOT connect the RTM to any apparatus or wiring from another manufacturer!
Substitution of components may impair the intrinsic safety of the RTM!
Clean only with a damp cloth to prevent the possibility of electrostatic discharge!
Battery Replacement
The RTM uses a field replaceable battery. The battery is a very specific type and should only be purchased
from WESROC Monitoring Solutions. Use of any other power source will compromise the safety and/or
performance of the RTM and will void the RTM warranty. Dispose of used batteries properly.
The RTM must be moved to a non-hazardous location before opening to replace the battery!
Radio Frequency Exposure
To ensure that exposure to hazardous radio frequency radiation is prevented, the RTM must NOT be
installed in a location where humans will be routinely within 20 centimeters of the RTM.
To ensure that FCC requirements are met regarding radio frequency exposure, the RTM is NOT to be placed
in operation where it will be co-located with another RTM. Co-location is considered to be where one
operating RTM is within 20 centimeters of another operating RTM.
Compliance Information
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate this equipment.
This product meets the applicable FCC Part 15 rules and Industry Canada's license exempt RSSs. Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent materiel est conforme aux CNRexempts de licence d'Industrie Canada. Son fonctionnement est
soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet
appareil doit accepter toute interférence, y compris celles susceptibles de provoquer le fonctionnement du
dispositive.