Operation Manual

WESROC Residential LTE Cellular Tank Monitor - Operation Manual
72-70-214, Rev. D Page 15 06/25/2018
PDU Screens
Logo Screen:
This is the first screen displayed when the PDU is powered up. This screen will contain the
WESROC logo, or may contain your company logo if arrangements have been made for a
custom logo. Press the right arrow key on the PDU to move to the Device List Screen. This
screen will only be displayed once when the PDU is powered on.
Device List Screen:
Each line on this screen represents a WESROC device that has transmitted a data packet
in the recent past. The serial number of the device will be displayed on the left side of the
screen. A configuration data packet from a RTM will be noted by the “CelTnk” or “CelMon”
device label in the middle of the screen. The time since the last transmission from each
device is listed on the right side of the screen. Press the up arrow or down arrow keys to
select the desired device. Press the right arrow key to move to the Main Menu Screen.