User's Manual

WESROC
®
RMS Cellular Tank Monitor - Operation Manual - Independent Technologies, Inc.
72-70-164, Rev. P4 Page 14 06/16/2011
PDU Screens
Logo Screen:
This is the first screen displayed when the PDU is powered up. This screen will contain
the Independent Technologies logo, or may contain your company logo if arrangements
have been made for a custom logo. Press the right arrow key on the PDU to move to
the List Screen. This screen will only be displayed once when the PDU is powered on.
List Screen:
Each line on this screen represents a WESROC
®
RMS device that has transmitted a
data packet in the recent past. The serial number of the device will be displayed on the
left side of the screen. A configuration data packet from a CTM will be noted by the
“CelMon” device label in the middle of the screen. The time since the last transmission
from each device is listed on the right side of the screen. Press the up arrow or down
arrow keys to select the desired device. Press the right arrow key to move to the Menu
Screen.