User's Manual

WESROC
®
RMS Cellular Tank Monitor - Operation Manual - Independent Technologies, Inc.
72-70-164, Rev. P4 Page 13 06/16/2011
Portable Diagnostic Unit
General
The handheld WESROC
®
RMS Portable Diagnostic Unit (PDU) is used to configure and
monitor the status of the WESROC
®
RMS Cellular Tank Monitor (CTM). This valuable
device should be considered an essential part of any installation tool kit. The following is
a summary of the sections of the PDU interface that are designed for use with the CTM.
A more detailed description of the operation of the PDU can be found in the WESROC
®
RMS Portable Diagnostic Unit Operation Manual.
A configuration data packet is required to be transmitted by the CTM before the PDU
can be used to configure the CTM or view detailed data from the CTM. The CTM will
transmit a configuration data packet before and after each report to the Host, when the
CTM is placed in Configuration mode, and each time a configuration command is
received from the PDU. The CTM must be in Configuration mode to respond to
configuration commands sent by the PDU. A configuration command is sent from the
PDU to the CTM each time the user changes a configuration parameter value and
leaves a configuration parameter editing screen.
PDU Screen Map
Logo
Screen
List
Screen
Menu
Screen
Summary
Screen
Config Sys
Screen
Config App
Screen
View Details
Screen
View Raw
Data
Screen
Parameter
Edit
Screen
Parameter
Edit
Screen