WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. WESROC® RMS Mini-Base Unit MT9100-BM Users Manual Revision Orig.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Table of Contents Wesroc® RMS Mini-Base Unit Overview .................................................................................................. 3 Wesroc® RMS Mini-Base......................................................................................................................... 3 Installation ...............................................................................................................................
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Wesroc® RMS Mini-Base Unit Overview Wesroc® RMS Mini-Base The Wesroc® Remote Monitoring System Mini-Base Unit is a reduced cost Base Unit that is used to receive transmissions from a Wesroc® RMS Tank Transmitter. It also uses the Public Switched Telephone Network to then communicate with the Wesroc® RMS Host Computer system. It functions just like the Regular Base Unit with a few exceptions.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Once a proper location has been found for the Mini-Base, connect the Mini-Base to AC power using the attached wall-mounted power supply. Then connect the Mini-Base to a phone line that has access to the Public Switched Telephone Network. It is important to verify that power to the Mini-Base will be constant and reliable. It is an easy mistake to plug the Mini-Base into a switched outlet.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Configuration Configuring the Wesroc® Mini-Base Unit to the Host Computer With the completion of the initialization process, the Mini-Base must then be configured to the Host Computer system to which it will be reporting. In order for the configuration to the Host Computer to be accepted, a record must be entered into the Host Computer for this particular Mini-Base.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Service Call Performing a Wesroc® Mini-Base Service Call While not absolutely necessary, it is important to perform a service call. The configuration process sets up the needed information in the Mini-Base in order for it to perform its function.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Wesroc® RMS Mini-Base Unit Specifications Mechanical Mechanical Size: Weight: 6.1” x 4.6” x 2.1” 8 oz. Electrical Electrical AC Voltage: 120Vrms DC Voltage: 6Vdc DC Current: 100mA Maximum, 60mA Typical. Radio Frequency Wesroc® RMS ISM RF System Frequency: 911.980 MHz to 920.980 MHz VP Power: +8dBm (6.3mW) FCC ID: RWB-MT9100-BM IC: 115A-MT9100-BM Revision Orig.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Warranty Information Independent Technologies, Inc. (ITC) warrants the MT9100-BM WESROC® RMS Mini-Base Unit against defects in materials or workmanship for a period of one year from date of shipment to original purchaser. All units deemed defective under this warranty will be replaced or repaired at ITC’s option. No other warranty is expressed or implied, nor will responsibility for operation of this device be assumed by ITC.
WESROC® RMS Mini-Base Unit – User Manual Independent Technologies, Inc. Telecommunication Notice This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among other information, the ACTA registration number and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line.
