Instructions / Assembly

ManualsBrandsMetropolitan ManualsBathroom & Wall LightingEdgmont Park 7-in W 2-Light Pandora Gold Leaf Modern/Contemporary Wall Sconce

INSTALLATION INSTRUCTIONS

Item#N6472-293 (New. 05/04/2017)

READ AND SAVE THESE INSTRUCTIONS

W A R N I N G ! S H U T P O W E R O F F AT F U S E O R C I R C U I T B R E A K E R .

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Fig. 1

Fig. 2

MOUNTING THE FIXTURE (Fig.1)

1. Shut off the power at the fuse box or circuit breaker

If necessary, remove the

old fixture, including the

mounting hardware.

Carefully remove the fixture from the carton and

check that all parts are included as shown in the

illustration.

3. Position the mounting plate (A

) on the wall, and

mark location of the

two mounting holes. Drill the

holes on the wall, and then insert the plastic anchors

(E).

4. Attach the mounting plate (A) to the junction b

using mounting screws (B) (Size: #8-32N*L0.5”)

The side of the mounting plate marked “GND”

must

face out.

5. Secure the mounting plate (A) by inserting the

wood

screws (F

) through the holes on the mounting plate

into the plastic anchors (E).

CONNECTING THE WIRES (Fig. 2)

6. At this point, connect

the electrical wires as shown

in Fig. 2, making sure that all wire connectors are

secured. If your outlet box

has a ground wire (green

or bare copper), connect the fixture’s ground wire to

it. Otherwise, connect the fixture’s ground wire

directly to the mounting plate

using the green screw

provided.

After wires are connected, tuck them

carefully inside the junction box.

FINISHING THE INSTALLATION (Fig.1)

7. Place the fixture body (D) over the mounting p

late

(A), and secure with the screws (C).

8. Place the candle cover (G

) over the socket of the

fixture body (D).

9. Install the light bulb(s) (not included)

in accordance

with the fixture’s specifications.

(DO NOT EXCEED

THE MAXIMUM WATTAGE RATING!) (

NE PAS

DEPASSER LA PUISSANCE NOMINALE

MAXIMALE!).

Your installation

is now complete. Return power and

test the fixture.

Note: Illustration (Fig.1) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased.

LA-2717E

FIXTURE

WIRES

Black or

Smooth

HOUSE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

HOUSE

WIRES

White

(Neutral)

FIXTURE

WIRES

Green or

Bare

Copper

(Ground)

HOUSE

WIRES

Green

(Ground)

Set# A-021-168300

-Mounting Plate

-Ground Screw

-Mounting Screw*2

Candle Cover# CCV24088P-293

MIN 75℃ SUPPLY CONDUCTORS

Code

Glass

GL6472

1*1

I GL6472-3*1

J GL6472-2*1

GL6472

5*1

GL6472

4*1

M GL6472-6*2