Operation Manual

9
[e-mail]
Option 2
You are able to receive national channels in analogue and you have no idea
whatyoucanreceiveindigitalquality.
If you are certain that you can receive additional channels, but you do
not know which network is used for these channels, we advise that
you do the following :
Find a UHF antenna with high gain (at least 15 dB) and connect it to
the ANT input of the receiver. Adjust the antenna so it is in the same
position as the previous one and start an automatic channels search
(Go to Menu / Setup / Service Setup / xxxx / Fullscan Replace Existing
Services).
If you find channels that you were unable to receive with your previous
antenna,simplyreplaceitwiththenewone.Otherwise,swiveltheantenna1/8
of a turn and start another automatic search. As long as you do not find any
channels, continue the same process. You should end up receiving at least
a few channels.
• Findoneofthenewchannelsreceived.
• GotoMenu/Setup/Service Setup/xxxx / Manual Scan.
• Atthebottomofthescreen,youcanviewthereceptionlevel and quality.
• Turn the antenna to optimise the quality and level (quality must be
atleast6).
• Screwtheantennatightly.
• PressMenu to go back to the previous menu.
• Start an automatic search (Go to Menu / Setup / Service Setup / xxxx /
Fullscan Replace Existing Services).