Operation Manual

7
[e-mail]
A red indicator appears on the
receiver. Press the ON/OFF
key of the remote. The green
indicator will light on and the
welcome screen appears on the
screen. If this is not the case, you
should double-check the scart
connectionsandorforcetheA/V
or EXT mode of your TV (refer
to theTV manual). Press OK to
start the installation.
The automatic channels lookup
will start. At the end, the first
channel will appear, meaning the
standard installation is done.
At the bottom of the screen, an
estimation of the remaining time
is displayed. Allow one or two
minutes for the receiver gives a
reliable estimation.
If the search has not found all channels (or none), this probably means
that you need to better the installation (see next paragraph). If no channels
are found after you have done so, this probably means that you area
isnotcoveredbyFreeview.