Technical information

9
[e-mail]
Option2
Youareabletoreceivenationalchannelsinanalogueandyouhavenoidea
whatyoucanreceiveindigitalquality.
If you are certain that you can receive additional channels, but you do
not know which network is used for these channels, we advise that
you do the following :
Find an UHF antenna with high gain (at least 15 dB) and connect it to
the ANT input of the receiver. Adjust the antenna so it is in the same
position as the previous one and start an automatic channels search
(Go to Menu / Setup / Service Setup / xxxx / Fullscan Replace Existing
Services).
If you find channels that you were unable to receive with your previous antenna,
simplyreplaceitwiththenewone.Otherwise,swiveltheantenna1/8ofaturnand
start another automatic search. As long as you do not find any channels, continue
thesameprocessuntilyoufindmorechannels.Youshouldendupreceivingatleast
a few channels.
• Findoneofthenewchannelsreceived.
• GotoMenu/Setup/Service Setup/xxxx / Manual Scan.
• Atthebottomofthescreen,youcanviewthereceptionlevel and quality.
• Turn the antenna to optimise the quality and level (quality must be
at least 6).
• Screwtheantennatightly.
• PressMenu to go back to the previous menu.
• Makean automaticsearch(GotoMenu/Setup/Service Setup/ xxxx /
Fullscan Replace Existing Services).