Technical information

7
[e-mail]
A red indicator appears on the
receiver. Press the ON/OFF
key of the remote. The indicator
switches OFF and a language
menu appears on the screen.
If this is not the case, you
should double-check the scart
connectionsandorforcetheA/V
or EXT mode of your TV (refer
to the TV manual). Press OKto
start the installation.
The automatic channels lookup
should start. At the end, the first
channel will appear, meaning the
standard installation is done.
At the bottom of the screen, an
estimation of the remaining time
is displayed. Allow one or two
minutes for the receiver gives a
reliable estimation.
If the search has not found all channels (or none), this probably means that
you need to improve the installation (see next paragraph). If no channels
are found after you have done so, this probably means that you area
is not covered by Freeview.