Technical information

[e-mail].
6
1 - Installation
A - Simplified installation
As the receiverisnotyetpluggedintothemainsource(throughthe230/12V
adapter),connecttheantennadirectlytotheANTinputofthereceiver. Loop the
tuners with the small coaxial cable provided as depicted in the below picture.
Connect the TV to the TV scart outlet of the receiver. Switch on the TV and
connect the receiver to the main source. Insert the batteries in the remote.
PresstheswitchontherearpanelontheONposition.
Screened cable. Replace in case of poor reception by
ahighqualitycable.
By connecting the TV and the receiver, you will keep the analogue
channels on your TV. This cable is not mandatory .
A
A
B
B