Technical information

17
[e-mail]
You can access the adjusting options for the TV signal in Menu / Setup /
TV Setup.
• OnAspect Ratio, select 4:3 or 16:9 depending on your screen format.
• Ifyouhave a4:3screen, youcanchoose onwidescreen the way a 16:9
image will appear on your TV.
- The CenterCutout mode increases the image size without
distorting it to fill the whole screen.
- The FullFrame mode resizes the image horizontally in a 4:3 screen.
The image is therefore distorted.
- The Letterbox mode shows a full image, with black strips at the top
and bottom of the screen.
• On Standard, choose between RGB and CVBS. The CVBS mode
(composite)givesanimageoflowerqualitythantheRGB,butiscompatible
with all TVs.
IMPORTANT !Ifyouhavea4:3screen,donotadjusttheAspect Ratio to 16:9 !
Apart from TV channels, terrestrial digital also allows you to receive
radio channels.
The radios are located at the bottom of the channels list.
9 - Radios
10 - Channel Search
Youshouldfollowthisprocesswhenyouhavelostachannelorifnewchannels
are emitted by operators.
• GotoMenu/Setup/Service Setup/xxxx / Fullscan Replace Existing
Services.
The receiver will search for new channels and add them.
8 - Adjusting the TV signal