Instruction manual

15
08 - Re-tuning
09 - Troubleshooting
Retuning your Eco zapbox
As digital switchover happens in your region, and extra channels and services
are launched, you will need to retune your Eco zapbox.
• Press the MENU button.
• Select System Installation and then press the OK button.
• Select Auto Scan and then press the OK button.
• Press OK button to delete all current channels and
start a full auto scan.
• Enter your passcode.
DON’T FORGET! If you have set your parental code you will need to enter
it to retune your Eco zapbox. The default code is 0000.
• The tuning progress screen will be displayed,
showing you how many channels have been
found and saved. Scanning may take several
minutes to complete.
• Your Eco zapbox has now been retuned.
Please note indoor aerial are not recommended for use with this product (this
includes loft aerials) otherwise you may experience problems with reception or
picture break ups on some channels.
Problem Possible cause What to do
Standby light not lit Mains lead unplugged
Mains fuse blown
Check mains lead
Check fuse
No signal found Aerial is disconnected
Aerial is damaged / misaligned
Check aerial lead
Check aerial
Ensure that you are capable of
receiving Digital TV.