Instruction manual

14
C - Factory default
• To reset your Eco Box to the original factory settings, select the Factory
Default menu.
• Press OK button and enter your passcode. Your Eco Box will now reset all the
default settings and re-tune all channels.
D - Low power mode
The Low power mode reduces the amount of electricity that your Eco zapbox
uses. The factory default is low power enabled. When the receiver is in standby
mode, please allow a few seconds for the zapbox to switch on. You can disable
the low power consumption by changing the settings in the MENU / SYSTEM
CONFIGURATION / SYSTEM SETTINGS / TV. By changing the settings the
current consumption will be increased in standby mode (5W instead of less then
2W in low power mode).
E - The accessories and games menu
From this menu you can play games and nd out
information about your Eco zapbox.
• Press the MENU button.
• To play the games, access the Game menu. You
have a choice of two games, Snake and Tetris.
• Use the arrow buttons on the remote control to
play the games, following the instructions on
screen. To exit games, press the EXIT button.
The Version window gives you information about
your Eco zapbox.
DON’T FORGET! The information shown on
your screen may be different to the one
shown above.