Operation Manual

English - 7 -

Power Connection

IMPORTANT: The set-top box is designed to operate on 12V DC. For this, an adaptor is used

which supplies a 12V DC voltage. Connect this adaptor to a mains socket that supplies

220-240V AC,50Hz.

• After unpacking, allow the set-top box to reach the ambient room temperature before you plug it in to the

mains for the ﬁ rst time .

∘

To Power Input

DC12V terminal on the

set-top-box

Antenna Connection

This illustration shows how to connect an antenna.

• Use ANTENNA IN to connect to an antenna system.

• You can also use TV OUT to connect the antenna to your TV through the set-top-box with an appropriate

antenna cable.

HDMI OUTPUT

35027073

ETHERNET

OPTICAL

AUDIO OUT

Power On-Off

• After plugging the set-top-box into the mains supply, a light will be seen on the front panel (Standby mode).

• When the set-top-box is ﬁ rst powered up please wait until the box is initialised. This will take a few

seconds.

• Afterwards, you can switch on your digital set-top box by pressing the standby button on the remote control.

You will see that the light on the front panel will change colour (power on mode).