Operation Manual

English - 5 -
Viewing Controls and Connections of the Set Top Box
Front Panel
Rear Panel
HDMI OUTPUT
35027073
ETHERNET
OPTICAL
AUDIO OUT
.
1
3
4
5
6
7
2
1. ANTENNA IN : You can connect the antenna to the aerial input of
the box.
2. TV OUT : You can use ‘’aerial TV out’’ to connect aerial to your TV.
3. ETHERNET: Use this to connect the box to an active LAN connection.
4. HDMI OUTPUT : Connect the box to your TV’s HDMI input (if available)
by using HDMI connection cable.
5. TV SCART : If your TV has a scart connector, you can connect the
box to your TV using a scart cable.
6. OPTICAL AUDIO : You can use this connector to output the digital
audio to an external device. See your audio system instruction book
for further information.
7. POWER SUPPLY : DC IN (12V) power connection.
Make sure that you connect all cables and connections before you plug the unit into the mains supply. After you
connect the unit to the mains supply, the LED light located on the front panel will be red (Standby mode).
ON/OFF
KEY
PROG
DOWN
PROG
UP
DISPLAY