Operation Manual

English - 15 -
• After you select Yes, factory settings will be loaded.
• Installation wizard will guide you through the
installation process. See the section, “First
Time Installation” in previous chapters for more
information on this process.
OSD Warning Messages
• Some warning messages may appear on the screen
indicating that a related function may not be working
properly.
No Signal
• When the box receives no signal (e.g. the antenna
cable is disconnected), “NO SIGNAL” message will
be displayed on the screen.
No Channels Have Been Added Yet
• When there are no channels stored in the box,
Channel List menu will not be displayed and channel
navigation will not be available.
• In such cases, the following error message will be
displayed.
Displaying Text
• Many digital terrestrial television channels broadcast
pages of information on programmes, the weather, news
and other topics.
• This digital teletext can be displayed by your set-
top-box. Indeed, some channels broadcast teletext
information entirely.
• When such a channel is selected, it will usually display
the opening page of information automatically, after a
short break.
• Some channels have digital teletext pages broadcast
along with the television programme.
• Press TEXT button to activate digital teletext pages
(if available).
• You can move through the information channels by
using navigation (“
”/“ ”/“ ”/“ ”), OK and coloured
buttons.
• Press the TEXT button again to exit teletext mode.