Operation Manual

English - 14 -
• Audio: Sets the preferred audio language.
• Subtitle: Sets the subtitle language. Selected language
will be seen in subtitles.
• Guide : Sets guide language.
Current (*)
(*) These settings can only be changed if the broadcaster
supports them. Otherwise, settings will not be available
for change.
• Audio: Changes the audio language for the current
channel.
• Subtitle: Sets the subtitle language for the current
channel.
IP Settings
• You can confi gure your receiver’s IP settings by using
this menu screen.
• Press YELLOW button to set static IP settings.
• Use BLUE button to confi gure dynamic IP settings.
• You can press RED button to disable IP confi guration.
• In order for the ethernet host to work correctly with
your internet connection it needs to have a unique IP
address. In most cases all of the parameters can be
provided by the DHCP server in their router. In this
case you should use the “Dynamic” option.
• In the unlikely event that you do not have a DHCP
server in your router or if you prefer to assign your
own IP address, then the “Static” option can be
used. You will need to enter a unique IP address
along with the default gateway and DNS server.
In most domestic networks the default gateway
and DNS server will both be the IP address of the
router.
Installation
• Installation menu will help you to retune your set-top-
box in order to store new services or stations.
• Select Installation from Setup menu by using “
”
or “
” buttons and press OK to continue.
• Installation menu includes the following items:
Automatic Channel Scan
• Select Automatic Channel Scan by using “ ” or “
” buttons and press OK button.
• Then the following message will be displayed on
the screen:
• Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
• If Yes is selected, automatic search starts.
• Selecting No cancels automatic search.
• After the scanning is completed, your set-top-box
will store all the available channels.
Manual Channel Scan
• This feature can be used for direct broadcast entry.
• Select Manual Channel Scan by using “
” or “ ”
button and press OK button.
• In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched for
the channels.
• For each valid channel number, signal level and signal quality
are shown on the screen.
• In both manual and auto search, any existing channel
in the database is not re-stored to avoid duplicates of
that channel.
First Time Installation
• If you want to load default settings of your set-top-
box, you can perform fi rst time installation.
• Select First Time Installation by using “
” or “ ”
buttons and press OK button.
• The following message, asking you whether or not to
delete all channels and settings, will be displayed.
• Highlight No by using “ ” or “ ” button to cancel
installation.
• Highlight Yes by using “
” or “ ” button and press
OK button to start fi rst time installation.