Operation Manual

18
For the TV list, as well as for the Radio list, you can move, delete rename or lock any channel. A locked
channels requires the entry of a secret code to be viewed.
These operations are done from MENU / Channels
Manager / TV channels.
A - Delete one or several channels
• Press the red key (LANG), the stringcourse in the top
of the window posts Delete channel.
• Select one by one with 56 keys, the channels you
want to delete and press OK each time.
• Press EXIT when you have finished the selection.
• Press OK to confirm.
@ Once you have pressed on the red key, you can press again on the red key to delete
all channels of the transponder (Delete Tp), all channels of the satellite (Delete satel-
lite) or all channels in memory (Delete all).
11 - Modify, Organize and manage channels
D - Add channels of a new satellite
• Go to MENU / Installation / Channel search.
• On the line Antenna, press 4key until the line Satellite displays New sat (satellite #
10 the
rst time)
• Go down on the Satellite line and press on the yellow key to edit the name of the satellite
(select letters one by one, while validating by the OK key, select OK to finish your edition).
• Go down on the line Transponder and press the red key to edit parameters of the
transponder.
• On the line Frequency, enters the 5 numbers of the frequency.
• On the line Flow, enters the 5 numbers of the flow (SR).
• On the line Polarization, select Hor ou Ver with 34keys. Now, the level and the quality
of the signal must appear. If not, leave the menu in the state and align the dish (see the
paragraph B page 10).
• Once the signal displays the good level and the good quality (at least 50%), select TP
search in the bottom of the screen and select OK.
• A windows opens, listing the new channels found.
• Select Visualize to exit and see the founding channels or select EXIT to go to the previous
menu.