Operation Manual

B - Automatic channel search

• Go to MENU / Installation / Channel search.

• On the line Antenna, select with 34keys the number which displays the good satellite on

the following line (eg. 1 for Hotbird).

• Press on the 5 key to select the research mode.

• With 4 key, select 1 Satellite search and press OK.

• A windows opens, listing the new channels found.

• Select Visualize to exit and see the founding channels or select EXIT to go to the previous

menu.

C - Deletion of a transponder

• Go to MENU / Installation / Channel search.

• On the line Antenna, select (if necessary) with 34keys the number which displays the

good satellite on the following line (eg. 1 for Hotbird).

• On the line Transponder, select with 34keys the transponder to delete.

• Press on the MENU key.

• Select Delete Tp and select YES.

@ Delete a transponder speeds automatic research.

• Go to MENU / Installation / Channel search.

• On the line Antenna, select (if necessay) with

34 keys, the number which displays the good

satellite on the following line.

• On the line Transponder, select with the 56

keys the transponder which displays good para-

meters on the following lines.

@ If no transponder displays good values,

select the last one, and press on the red

key. Then, you will be able to enter manu-

ally the characteristics of the new trans-

ponder.

, Go down on the line from bottom and select TP

search.

• Select OK to launch research.

• A windows opens, listing the new channels

found.

• Select Visualize to exit and see the founding

channels or select EXIT to go to the previous

menu.