User manual

Universal Remote Control URC 1001
English - 29
Calculator
The remote control includes a calculator for basic
arithmetics. Proceed as follows to use the
calculator:
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8) once. The display shows
[CALCULATOR].
 Press the OK button (22). The display shows a
zero.
 Enter the first number via the numeric keys (3).
The number cannot exceed 10 digits.
Use the EXIT button (23) to erase the last-
entered digit.
 Use the arrow buttons (8) to enter one of the
four basic arithmetic operations. The
corresponding sign will appear after the
entered number.
You can choose one of the following
operations:
Addition
Subtraction
Division
Multiplication
 Enter the second number via the numeric keys
(3). The number cannot exceed 10 digits.
 Press the OK button (22). The result will be
displayed:
 Quit the process by pressing any source device
selection button (2).