User manual

Universal Remote Control URC 1001
28 - English
Setting the Time
The time is shown on the remote control display.
You can set it as follows:
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8). The display shows
[CONFIGURE].
 Press the OK button (22). The display shows
[TIME SETUP].
 Press the OK button (22). The display shows
[TIME]. The day of the week and the set time
will be displayed. The day of the week blinks.
 Press
(8) to select the desired day of the
week.
 Press
(8). The first digit of the time will start
blinking.
 Enter the time via the numeric keys (3). Press
or (8) to toggle between the digits. The
currently-selected digit blinks.
 Press
or to select between AM (before
noon) and PM (afternoon).
 Press the OK button (22). The message
[SUCCESS] will appear for a few seconds and
the device returns to the [TIME SETUP] level.
 Quit the process by pressing the EXIT button
(23) twice.