User manual

Universal Remote Control URC 1001
English - 27
Backlight
Press the LIGHT button (17) to switch on the
backlight illumination. The backlight illumination
will switch off after a preset delay.
Press the LIGHT button (17) again to switch the
backlight illumination back off.
Backlight Delay Time
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press (8). The display shows
[CONFIGURE].
 Press the OK button (22). The display shows
[TIME SETUP].
 Press
(8). The display shows [LIGHT-TIME].
 Press the OK button (22). The present
backlight delay time (in seconds) will appear.
 Press
or (8) to select a different time. You
can choose a value of 3, 5, 10 or 15 seconds.
Choosing “00” will disable the backlight
illumination.
 Press the OK button (22). The message
[SUCCESS] will appear for a few seconds and
the device returns to the [LIGHT-TIME] level.
 Quit the process by pressing the EXIT button
(23) twice.