User manual

Universal Remote Control URC 1001
English - 25
Favourite
This function lets you program up to 15 channels
from any channel presets of your receivers (TV or
STB) and easily recall them.
Programming Favourites
This function supports the source device buttons
TV and STB only. It is also possible to program
favourites on the AUX button, but this will have to
be configured first for TV or STB mode.
 Press the source device selection button (2) of
the device for which you want to add one or
more favourites.
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8) four times. The display shows
[FAV CH].
 Press the OK button (22). The display shows
[SETUP].
 Press the OK button (22) again. The display
shows [FAV-CH01].
If necessary, press the or (8) button to
select another sequential number to save your
favourite. You can use the presets FAV-CH01
to FAV-CH015 for saving.
 Press the OK button (22). The display shows
[SELECT KEY].
 Next use the numeric buttons (3) to assign the
presets of the different devices. Enter the
preset channel exactly as you would do for
normal operation.
If the preset requires more than one digit, use
the toggle button (4) (depends on the target
device operation).
 Press the OK button (22). The message
[SUCCESS] will appear for a few seconds on
the display. The device will switch to the enter
mode for the next favourite, for example [FAV-
CH02].
 Continue programming the next favourite
 or
 quit the process by pressing the EXIT button
(23) three times.