User manual

Universal Remote Control URC 1001
English - 21
Erasing a Macro
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8) three times. The display shows
[MACRO].
 Press the OK button (22). The display shows
[MACRO1].
 Press
or (8) to select the macro you want
to delete.
 Press the OK button (22). The display shows
[SET UP].
 Press
(8). The display shows [DELETE].
 Press the OK button (22). The display shows
[SURE DELET].
 Press the OK button (22) to confirm the
deletion.
 The message [DELETED] will appear for a few
seconds and the device returns to the previous
level.
 Quit the process by pressing the EXIT button
(23) two times.