User manual

Universal Remote Control URC 1001
20 - English
 After all the desired buttons have been
programmed, press the OK button (22). The
message [SUCCESS] will appear for a few
seconds and the device returns to the previous
level.
 Quit the process by pressing the EXIT button
(23) two times.
Executing a Macro
 Press the MACRO button (28). No message
will be displayed.
 Within the next 15 seconds, press any of the
numeric buttons (3) 1 to 6. The numeric button
1 corresponds to Macro 1, the numeric button 2
corresponds to Macro 2, etc.
 The macro will be executed immediately. Make
sure that the remote control is within reach of
all devices that you want to control.
If you have enabled the backlight, it will blink
during macro execution. If there is no macro
assigned to the selected numeric button, the
backlight blinks briefly four times.