User manual

Universal Remote Control URC 1001
18 - English
Erasing All Learned Key Codes
This function allows you to erase all manually
learned key commands for all devices. Any
buttons that have been programmed via a device
code will not be erased.
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8) twice. The display shows
[LEARNING].
 Press the OK button (22). The display shows
[LEARN KEY].
 Press
(8) three times. The display shows
[DELETE ALL].
 Press the OK button (22). The display shows
[SURE DELET].
 Press the OK button (22) to confirm the
deletion.
If there is a large number of assigned key
codes, the deletion may take some time.
During this process, the display will show
[WAITING].
 The message [DELETED] will appear for a few
seconds and the device returns to the previous
menu [DELETE ALL].
 Quit the process by pressing the EXIT button
(23) twice.