User manual

Universal Remote Control URC 1001
English - 17
 If required, continue erasing more key functions
by pressing the corresponding button
 or
 quit the deletion process by pressing any
source device selection button (2).
Erasing All Key Codes for a Device
This function allows you to erase all manually-
learned key commands for a specific device. Any
buttons that have been programmed via a device
code will not be erased.
 Press the source device selection button (2) of
the device for which you want to erase all
programmed information.
 Press and hold the SET button (21) for at least
3 seconds. The display shows [CODE SETUP].
Then release the SET button (21).
 Press
(8) twice. The display shows
[LEARNING].
 Press the OK button (22). The display shows
[LEARN KEY].
 Press
(8) twice. The dsplay shows
[DELETE DEV].
 Press the OK button (22). The display shows
[SELECT DEV].
 Press the source device selection button (2) of
the device for which you want to erase all
programmed information. The display shows
[SURE DELET].
 Press the OK button (22) to confirm the
deletion.
If there is a large number of assigned key
codes, the deletion may take some time.
During this process, the display will show
[WAITING].
 The message [DELETED] will appear for a few
seconds and the device returns to the previous
menu [SELECT DEV].
 Quit the process by pressing the EXIT button
(23) three times.