User manual

Universal Remote Control URC 1001
12 - English
After you have entered the information, the first
digit will blink again. If you mistyped the code,
you have the chance to enter it again at this
time.
Only for the device type AUX, a fifth digit must
be entered to set the device code. To do this,
use the following list.
0 - TV
1 - VCR
2 - DVD
3 - STB
4 - DVR
5 - AUDIO
6 - Cable
7 - CD
 Press the OK button (22) to confirm the entered
device code. The message [SUCCESS] will
appear for a few seconds and the device
returns to the previous menu [CODE SET].
If the message [NOT FOUND] appears on the
display, the entered information was wrong and
has to been entered again. After a few
seconds, the display will return to the device
code entry mode.
 Quit the programming mode by pressing the
EXIT button (23) twice.
 Verify the device functionality. If the device fails
to respond as desired, try the next device code
from the list.