Specifications

METTLER TOLEDO
DIVA Operation Manual 7
For Weigh Only Version:
The Weigh Only version comes with a tower mount.
Assemble the Weight Only tower as is illustrated here:
2. Set the scale base on a sturdy, level surface. Level the scale by turning the adjustable feet on the bottom of
the unit. Adjust the feet until the level bubble is in the center of the circle.
Bubble indicator:
Correct Wrong
3. Put the platter on top of the DIVA scale base.
4. Connect the tower display cable to the scanner.
5. Attach the communications cables between the scanner and the POS.
Power up sequence
Note: Before powering on the DIVA scale, always make sure there is nothing on the platter.
Apply power to the scanner. The scale will go through a series of self-tests and then will proceed to normal
operating mode. The power-up sequence is as follows:
1. All segments of the display characters are lit. This verifies operation of all segments;
2. The scale displays the country code and GEO code, software part number and revision.
3. The scale then captures zero and is ready for normal operation.
Display
Display Cable
Display Bracket
Display Tower