Specifications

3
Scale/Load Cell Configuration
Bar Codes
Single or Dual Cable Scale Configuration Bar Codes
Unit Configuration (Pounds)
For Kilogram weight units see page 4.
The following bar codes can be used to configure a Single or Dual Cable
MS2xx0.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect
the Scale to Host cable prior to configuring the scale.
The MS2xx0 must be in scale service mode to use these bar codes.
Pounds Calibration
³ 9 9 6 0 4 2
Set the scale measuring range from
0.00 to 30.00 pounds.