Specifications

2
Important Bar Codes
Scale Save Data Bar Code
The Scale Save Data bar code must be scanned last to “save” the changes in the
scale’s memory. The scale will then reset and begin normal operation. This is
required only for scale configuration items – not for calibration.
Scale Save Data
³ 9 9 6 0 4 5
Scale Type Bar Code
The Stratos scanner should have been already programmed to recognize the
type K Diva scale. If, for any reason, the scanner’s non-volatile memory is lost,
the following bar code must be scanned to reprogram the scanner for the type K
Diva scale.
Type K Diva Scale
³ 4 4 6 5 1 0