Specifications

18
COM Port Settings (Baud Rate)
The following bar codes will change scale parameters intended for a Dual Cable
environment.
If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below
must be scanned after the Scale Protocol bar code in order to be effective.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect
the Scale to Host cable prior to configuring the scale.
The MS2xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the changed
configuration (see page 2).
Scale = 2400 Baud Rate
³ 9 9 6 0 1 7
Set the scale baud rate for dual cable
applications to 2400 baud.
Scale = 9600 Baud Rate
³ 9 9 6 0 1 8
Set the scale baud rate for dual cable
applications to 9600 baud.