User`s manual

Magnetic Card Reader Installation

An optional Magnetic Card Reader (MCR) can be installed on the right side of Crossbow.

Installing an MCR

9. Turn off system power.

10. Unplug loopback from the MCR socket. The MCR socket is found on the right side on the

back of Crossbow.

1. Connect MCR cable.

2. Install MCR to the main unit (2 screws)

3. Turn on system power..

Note: If the MCR does not work normally, please refer to troubleshooting.

Attention: The loopback or the MCR cable must be inserted in the socket for an external

keyboard to function with Crossbow.

Magnetic Card Reader (MCR)

Loopback