User`s manual

Compact Flash Installation

Crossbow will configure Compact Flash in IDE mode as secondary master after it is installed. The

next available drive letter will be automatically assigned to Compact Flash.

Installing Compact Flash

10. Turn off system power.

11. Tilt the main LCD to 95 degrees.

12. Remove the 4 screws that attach the

Compact Flash cover to the main unit and

lift the cover off.

13. Insert Compact Flash and lock the black lever in a 90 degree position.

14. Replace cover and 4 screws.

15. Turn on system power.

Compact Flash

Black lever in a

90 degree

position