User`s guide

B - 2
Scanner Model Names
Model names may differ depending on how and/or where they are used in ReM. The table below lists
how a model is labeled in each of the following instances:
•The Scanner Model drop-down list on the Standard ReM Installer (see page 2-5).
• The model numbers used when creating ReM.config files for the Silent Installer (see page 2-15).
•The Scanner Model drop-down list on the Find page (see page 3-10).
216 RC_INVALID_XML_FILE_FORMAT The XML file has an invalid starting character. XML files
cannot start with a space.
Scanner Return Codes
300 RC_OPEN_PORT_FAILED Could not open the entered COM port.
301 RC_ENTER_CONFIG_MODE Could not enter the scanner into configuration mode.
302 RC_ENTER_PROGRAM_MODE Could not enter the scanner into program mode.
303 RC_ENTER_FLASH_MODE Could not enter the scanner into flash mode.
304 RC_READ_CONFIG_SETTINGS Could not read the configuration settings from the scanner.
305 RC_WRITE_CONFIG_SETTINGS Could not write the configuration settings to the scanner.
306 RC_HARDWARE_HANDSHAKE Error with hardware handshaking with the scanner.
307 RC_WRITE_FLASH_SETTINGS Could not write the flash data to the scanner.
308 RC_WRITE_FLASH_CHECKSUM Could not write the flash checksum to the scanner.
309 RC_GET_EXTENDED_PARSING Could not get the extended parsing from the scanner.
310 RC_SET_EXTENDED_PARSING Could not set the extended parsing to the scanner.
311 RC_GET_SERIAL_NUMBER Could not get the scanner serial number.
312 RC_GET_FIRMWARE_NUMBER Could not get the scanner firmware number.
313 RC_FIND_USB_DEVICE Could not find the USB device on the system.
314 RC_CHANGE_BAUD_RATE Could not change the scanner or the serial ports baud rate.
315 RC_ERASE_FLASH Could not set the scanner to erase the flash memory.
316 RC_WRITE_FLASH_SIZE Could not write the data size to the scanner.
317 RC_FIND_USB_TIMEOUT A timeout occurred while trying to find the USB device.
318 RC_REQUEST_FILE_INFO Could not get either the date/time or the file size information
from the scanner.
319 RC_WRITE_FILE_DATA Could not write the file data to the scanner.
320 RC_SAVE_FLASH_FILE Error saving the flash file to the scanner.
321 RC_FILE_SAVE_COMMAND Did not receive the File Save command from the scanner.
322 RC_ENTER_BOOT_FLASH_MODE Could not get the scanner to enter boot flash mode.
323 RC_ENTER_FLASH_MODE_TIMEOUT Timeout occurred while trying to enter the scanner into boot
flash mode.
324 RC_CREATE_DEVICE_HANDLE Could not create the USB device handle.
325 RC_INVALID_MAP_SIZE Scanner did not return a valid number for the multi-config
map size.
350 EC_I2C_WRITE Could not write data to I2C.
351 EC_I2C_READ Could not read data from I2C.
352 EC_WRITE_PACKET_CHECKSUM Could not write packet checksum data to I2C.
353 EC_WRITE_IMAGE_CHECKSUM Could not write image checksum data to I2C.
Code Name Description