User`s guide

3 - 13
Update Page
The Update page allows you to flash the firmware on multiple devices on a network at the same time.
The firmware file is established on the Admin Settings page (see page 3-6).
Like the Find page, the Update page has multiple tabs, which reflect the results of your most recent Find
result for each numbered tab.
For example, if you used the first tab on the Find page to search for MS7580 scanners and the second
tab for MS2400 devices, you can select the devices that you want to flash on both Update tabs. Both
operations perform at the same time and the results display on the respective tabs.
Note: A change to the firmware file on the Admin Settings page does not display on the current tab of
the Update page until you click Refresh. You should select Refresh only when there is no
operation running on that tab; otherwise, you will lose operation information.
Update Firmware
1. Select the check boxes next to the desired scanners or click Select All.
2. Repeat Step 1 on each of the tabs you wish to update.
3. Click Update Firmware and the following message displays:
4. Click OK.